Welcome to Zeebeetronics

Products

Back to Products

WRIST STRAP TESTERS Wrist Straps are the first line of defence against electrostatic charge build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time the strap must remain electrically safe for the user. Thus, it is important to test every strap regularly. The wrist strap tester performs these checks. WRIST STRAP & FOOTWEAR TESTERS The Z103 series checks both wrist straps and footwear. It clearly indicates whether or not the resistance of the ESD footwear including the personnel is within acceptable ranges. Can be used with Footplate or Stand. Optional Instruction Board also available. DUAL FOOTWEAR TESTER The Dual footwear tester along with the stand or Foootplate is specially designed to perform tests independantly on the LEFT & RIGHT ESD footwear COMBO TESTER Wriststrap & Dual footwear tester all in one instrument FOOTPLATES FOR FOOTWEAR TESTERS CONTINUOUS WORKSTATION MONITORS The wriststrap is continuously monitored to detect loss of continuity between operator and ground. Conditions such as broken coil cords and improper skin contact are detected instantly to alert the operator before expensive ESD damage can occur. Continuous monitoring reduces the need for periodic checks and audits and also ensures greater security. This instrument also checks the work surface for proper grounding.
SURFACE RESISTIVITY METERS The surface resistivity of any flat surface is indicated by a row of LEDs. In the circuit industry, products such as packaging materials, component storage bags and trays, work bench surfaces, floor mats, etc., have resistance values which need to fall within certain limits. It also has surface-to-ground measurement capability wherein the resistivity differential between any surface and any chosen ground can be determined. The model Z203-100 is designed to measure Surface Resistivity, Resistance between 2 points, and Surface to Ground in accordance with EOS/ESD Association Std S4.1. Measurements in the conductive range are made at 10V and higher values at 100V. EXTERNAL PROBES FOR 100V SRM
Z203P		Measurements can be taken with built-in parallel electrodes or special external probes. The external probes weighing 2.27Kg, 64mm dia with conductive base cushioning conforms to EN 61340-4-1
This is a non-contact, low cost, static monitoring and locating instrument. It utilises a centre-zero meter display to indicate the magnitude and polarity of the electrostatic charge. The instrument has good directional sensitivity and is ideal for measuring electric charges encountered in critical electronic assembly and storage areas as well as Antistatic Work Stations. It can also be used for Plastics, Paper, Textiles, Food, Explosives and Pharmaceutical Industries.		STATIC CHARGE METER (Analog) Z2041
STATIC CHARGE METER (DIGITAL) Z205		This is a non-contact, compact digital instrument designed to measure static voltages on objects & surfaces. It features a large LCD display to indicate the magnitude and polarity of the electrostatic charge directly in Kilovolts. The instrument is ideal for measuring electric charges encountered in critical electronic assembly and storage areas as well as Antistatic Work Stations. It can also be used for Plastics, Paper, Textiles, Food, Explosives and Pharmaceutical Industries.
This instrument is designed to measure the Static Voltages carried on a human body. It is a good auditing tool to verify whether Personnel entering an ESD safe area are carrying any hazardous charges on themselves. It can also serve to verify whether all the ESD protection measures which have been taken to make a particular area ESD safe are effective. By such measures we mean conductive flooring, antistatic table mats, wrist straps, static sheilding bags, ionizing equipment, conductive containers and bins etc. It is very simple to use and only requires the personnel under test to touch the Button on the instrument and directly read the charge level in volts on the meter. The Z2055A version has a hazard warning feature for Voltages over 1000V		HUMAN BODY VOLTAGE CHECKER Z2055
ELECTROSTATIC ALARM Z201		It is designed to provide a quick and convenient method of locating static charges and their approximate charge levels. It is primarily intended for use in static-safe handling areas, as an early warning system to alert the personnel nearby. The hazard may be in the form of personnel who are generating static or personnel who may be holding a charged object without observing the standard safety procedures for handling static sensitive devices.
STATIC ELIMINATOR (IONIZER) The generation and accumulation of unwanted electrostatic charges, both surface and airborne, poses a serious problem in various industries and laboratories. This Bench Top instrument is designed to neutralise your ESD work-station or ESD protected area with a stream of ionized air. An axial fan gives the desired air flow to neutralise static on specific objects rapidly, as well as control static in the general area in front of the ionizer. It does what Wrist straps and Conductive mats cannot do - i.e. remove static charges from non-conductive objects and surfaces. OVERHEAD STATIC ELIMINATOR (IONIZER) This OVERHEAD unit can be conveniently hung over the work area for a large coverage to neutralise the charges on personnel or on any item entering an ESD sensitive area. This is achieved with a stream of ionized air. "Ion showering" is the only effective method of removing static charges from non-conductive objects and surfaces.
ION AIR GUN Z2072		The Ion Air Gun along with it’s HV Power Supply and Air Compressor forms a system which is designed to neutralise static charges upto a distance of 1m. (Air Compressor not supplied by us) It removes static, contaminants and dust from flat surfaces as well as solid objects prior to assembly, packaging, painting and finishing. This makes the Z2072 an effective local area cleaner.
F UMEX is a compact, portable, self-standing, low noise unit which can be adjusted to any angle for maximum smoke absorption and is specially designed to suck the harmful fumes away from the operator which then gets absorbed onto an activated carbon filter. FUMEX is designed for table-top operation and the specially designed base allows it to be even hung on any vertical surface, if such a location is preferred.		SOLDERING FUME ABSORBER ZE101
COMMON GROUND POINT Z111		As per ANSI/ESD S20:20 all conductors including Personnel must be electrically connected and attached to a known ground. A common question about *anti-static wrist straps* is how and where to ground them. Anti-static work station operators need a convenient method of grounding their wrist straps where the ground cord won’t get in the way of their work. This convenient device provides the means to ground anti-static wrist straps at your work station.

COMMON GROUND POINT Z111