Static
Eliminator Ionizer) Z208 / Z209
The
generation and accumulation of unwanted electrostatic charges, both surface
and airborne, poses a serious problem in various industries, work areas
and laboratories.
This unit can be WALL-MOUNTED for a large coverage of the work area or fixed over an entrance Doorway to neutralise the charges on personnel or on any item entering an ESD sensitive area. This is achieved with a stream of Ionized air. "Ion Showering" is the only effective method of removing static charges from non-conductive objects and surfaces.
The unique high-frequency pulse circuitry provides fast discharge with limited air flow. A high air flow would lead to higher noise levels and may also disturb small components under it. It is designed for continuous use and a current limitor circuit ensures operator safety even if the Ion Emitters are accidentally touched.
It is available in 2 models Standard (Z 208) & Self-Balancing (Z 209) The latter has special circuitry to ensure an accurate balance in output of Negative and Positive ions. This is essential to ensure that no net charge is induced by the ion shower. Balance is maintained irrespective of supply voltage and even if the discharge electrodes are dirty. Balanced output is essential when used in very critical ESD sensitive areas.
Application Areas:
This unit can be WALL-MOUNTED for a large coverage of the work area or fixed over an entrance Doorway to neutralise the charges on personnel or on any item entering an ESD sensitive area. This is achieved with a stream of Ionized air. "Ion Showering" is the only effective method of removing static charges from non-conductive objects and surfaces.
The unique high-frequency pulse circuitry provides fast discharge with limited air flow. A high air flow would lead to higher noise levels and may also disturb small components under it. It is designed for continuous use and a current limitor circuit ensures operator safety even if the Ion Emitters are accidentally touched.
It is available in 2 models Standard (Z 208) & Self-Balancing (Z 209) The latter has special circuitry to ensure an accurate balance in output of Negative and Positive ions. This is essential to ensure that no net charge is induced by the ion shower. Balance is maintained irrespective of supply voltage and even if the discharge electrodes are dirty. Balanced output is essential when used in very critical ESD sensitive areas.
Application Areas:
- ESD Sensitive work areas and assembly units.
- Plastic and paper industries.
- IT & Computer industry.
- Clean rooms.
| Air Flow | : | 1000 cu m/hr |
| Noise Level | : | 50dbA (at 1m) |
| Supply | : | 230 V AC, 50 Hz, 40 Watts |
| Ionization Voltage | : | 6-8 KV |
| Ion Balance | : | -/+ 50 V (in self-balanced model) |
| Construction | : | Composite Plastic Moulded Enclosure |
| Dimensions in mm | : | 1040 x 300 x 180 |
| Weight | : | 10 Kgs |
| Warranty | : | One year |