Wriststrap & Footwear Tester Z103 (with optional Footplate Z103F)

Wrist straps and ESD footwears are the first line of defence against electrostatic charge build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time the wrist strap/ footwear must remain electrically safe for the user. Thus, it is important to test every wrist strap/ test footwear regularly.

In order to protect sensitive electronic components the maximum wrist strap resistance should not be more than 10 meg ohms and footwear resitance should not be more than 35 Mohms. On the other hand, the resistance should not be less than 0.75 m ohm as protection to the wearer from dangerous levels of voltage and current flow.

The wrist strap and the footwear tester checks these parameters under actual operating conditions with the strap on the wrist or footwear to the foot. It clearly indicates whether or not the resistance of the wrist strap/ footwear system including the wearer is atleast 750 kilo ohms and not more than 10 meg ohms / 35 meg ohms respectively.

Model Z103-100 has upper pass limit of footwear at 100 Megohms instead of 35 Megohms

Specifications:


Pass Range : Wrist strap 0.75 meg ohms to 10 meg ohm / Footwear 0.75 meg ohms to 35 meg ohm
In Model Z103-100 : Footwear 0.75 Meg Ohms to 100 Meg Ohms
Indications : By 3 LED's and Audible alarm for fail mode
Actuation : By gently pressing metal sensor plate
Accuracy : +- 10%
Power : 9 V DC battery
Low Battery : Orange- Warning less than 7 volts
Dimensions : 125 x 75 x 29 mm
Weight : 150 gms (without battery)
Calibration : Recommended every 12 months
Traceability : To national standards
Warranty : 12 months